:strip_icc()/GettyImages-1129272200-29043c20f69c45508bf88875c9daed87.jpg?w=1200&resize=1200,0&ssl=1 "How one can Substitute a Rest room")
Mission Overview
-
Working Time:
2 hours
-
Full Time:
4 hours
-
Expertise Diploma:
Intermediate
-
Estimated Value:
$200
When a bathroom begins displaying indicators of damage and tear, like leaks or fastened working water, it could possibly be time to trade it. Eradicating an outdated lavatory and placing in a model new one will not be as troublesome as a result of it could seem. Most DIYers with a bit little bit of plumbing data should be able to cope with this job.
It’s helpful to have a second particular person to help carry out the outdated lavatory and the model new lavatory into the rest room. Alternatively, chances are you’ll take apart a two-piece lavatory and carry one piece at a time. If lavatory points aren’t resolved quickly, they’ll end in extreme water funds, leaks, and water hurt. Use this data to be taught to substitute a bathroom.
Sooner than You Begin
Not every draw back requires altering the toilet, so sooner than shopping for a model new lavatory, troubleshoot the issue to search out out if there is a neater reply. As an illustration, if the toilet is working at all times, you may solely need to trade the flapper, which takes a few minutes and costs significantly decrease than a model new lavatory. Equally, an expert DIYer can substitute a faulty flush valve or fill valve with out so much challenge.
If the exact lavatory is damaged, significantly worn, or doesn’t go properly with the preferences of the purchasers, the next step is to measure the world. Taking right measurements ensures that the model new lavatory will match inside the remaining room. Moreover, accumulate some outdated towels, cloths, or rags that you don’t ideas getting moist or dirty.
How one can Measure for a New Toilet
The correct measurements are compulsory for getting the becoming lavatory for the rest room. If the measurements are incorrect, the toilet will not match appropriately. It’d push up in direction of the wall, counters, vanities, sinks, plumbing traces, tubs, showers, and even overhead shelving. Even when the toilet fits, it couldn’t sit over the drain line appropriately if the measurements are off, so right measurements are compulsory sooner than searching for a model new lavatory or starting this job.
- Measure from the wall to the center of certainly one of many toilet bolts to search out out the rough-in measurement for the toilet.
- Measure from the center of the toilet to any shut by water present traces. Some bogs have a wider base, so it is a necessity to search out out if the toilet will match subsequent to the supply line.
- If there are one other shut by obstructions, like a bath or a conceit beside the toilet, measure from the center of the toilet to the obstruction to ensure there’s adequate space for the model new lavatory.
- Equally, if there are cupboards or cabinets above the toilet, measure from the bottom to the underside shelf to search out out the vertical space accessible for the model new lavatory.
- If the toilet you are altering has a spherical bowl, nevertheless you want to swap to a bathroom with an elongated bowl, then measure from the wall behind the toilet to the wall or any obstructions in entrance of the toilet to ensure there’s adequate clearance to utilize the model new lavatory comfortably.
Instructions
How one can Change a Toilet
-
Put collectively the House
Organize for the choice job by laying down some outdated towels and placing a bucket beneath the toilet tank the place the incoming water line connects. Place the model new lavatory on a towel until it is wished to forestall it from scraping the bottom.
Have a worn towel and a giant garbage bag shut by to wrap up the outdated lavatory tank and base so that they don’t drip or leak onto the bottom while you carry them out of the home. You could even have a few rags out there to clean the bottom after eradicating the outdated lavatory.
-
Flip the Water Off and Drain the Toilet
There could also be usually an isolation valve located on the bottom of the toilet on the incoming water present line. Flip off this valve to shut down the transfer of water to the toilet. Then flush the toilet to empty most of the water.
Water stays within the lavatory, so the next step is to utilize a set of channel lock pliers or a wrench to disconnect the water present line, allowing any remaining water from the tank to empty into the bucket.
Use a giant sponge to soak up any water left within the lavatory, squeezing the sponge into the bucket until the toilet is completely empty.
-
Unscrew the Bolts and Take away the Toilet
Discover the bolts on each aspect of the toilet. These bolts are presently holding the toilet in place. Use an adjustable wrench or a set of channel lock pliers to unscrew the bolts. Subsequent, run a putty knife or utility knife throughout the bottom of the toilet to cut via the caulking.
When the toilet is free, elevate the toilet away from the bottom. It will require two people counting on the DIYer’s power and the toilet’s weight. Wrap the underside of the toilet with an outdated towel or garbage bag and carry it exterior.
When you’re ending this restore alone, take away the toilet tank sooner than eradicating the underside. Accomplish this by unscrewing the tank bolts and lifting the tank off the bowl to separate the two objects.
-
Pry Off the Wax Seal and Clear the Floor
If the wax seal or lavatory seal did not elevate up with the toilet, pry it off the flange with a putty knife. Toss the outdated wax seal and scrape away any remaining residue or leftover particles whereas leaving the flange in place.
Study the flange and substitute it whether or not it’s cracked or in some other case damaged. If the flange is in good scenario, it could be reused. Clear the flange and the surrounding house with an outdated materials or rag sooner than persevering with.
When you occur to nonetheless need to choose up the model new lavatory or are taking a break, stuff a rag inside the drain hole to forestall sewage fumes from wafting out previous to putting in the model new lavatory. This moreover blocks the outlet to forestall devices from falling in.
-
Change the Toilet Bolts
Check the prevailing lavatory bolts. In some circumstances, they could possibly be OK to reuse, nevertheless generally, they should get changed, notably if there’s any sign of rust or degradation.
Usually, a model new lavatory comes with new lavatory bolts, so unscrew and take away the outdated bolts after which insert and protected the model new bolts that obtained right here with the toilet. If the model new lavatory did not embody lavatory bolts, you a large number purchase these elements individually.
-
Arrange the New Wax Ring
A wax ring seals the connection between the toilet and the drain. A model new lavatory usually comes with a wax ring, however when it doesn’t, select one up from the native home enchancment retailer.
Open the wax ring and coronary heart it on the flange, guaranteeing that the sloped fringe of the wax ring is coping with down so that the slim end touches the flange. If carried out appropriately, the wax ring sorts a seal to forestall water and waste from leaking onto the bottom.
-
Place and Secure the Toilet Bowl
Have a second particular person help keep the toilet so the outlet drain is positioned instantly over the wax ring. Lower the toilet, adjusting the place to allow the bolts to cross via the bolt holes on each aspect of the toilet. With the toilet in place, push down firmly and rock the toilet backwards and forwards to seal the wax ring.
When you’re placing in a two-piece lavatory, ending this part of the mission could possibly be easier sooner than connecting the toilet tank, notably for those who wouldn’t have a second particular person to help keep the load.
After threading the bolts, protected the toilet bowl in place by together with plastic washers and tightening new nuts onto the bolts by hand. Finish tightening the bolts with a wrench or channel lock pliers.
-
Trim the Toilet Bolts and Diploma the Toilet
If the toilet bolts are sticking up an extreme quantity of to positioned on the decorative caps, use a hacksaw to trim the bolts to the appropriate measurement. Wipe away any metallic filings to stay away from metallic splinters.
Equally, if the toilet seems unbalanced, use a stage to verify; then use lavatory shims to stage the toilet. Slide a shim beneath the doorway, once more, or sides to barely regulate the place until the toilet is stage.
-
Be a part of the Toilet Tank and Present Line
Two-piece bogs could also be disconnected to make the toilet arrange easier. When you occur to disconnected the toilet tank sooner than placing within the lavatory bowl, put the objects once more collectively now.
Guarantee that rubber gaskets are in place, and slide the tank bolts via the holes so that they lengthen out the underside of the tank. Set the toilet tank onto the bowl so that the bolts slide into the holes on the once more of the toilet bowl. Tighten new nuts onto the bolts to protected the connection.
Subsequent, be part of the incoming water present line to the underside of the toilet tank. Use a set of channel lock pliers or a wrench to tighten the nut until the connection is cosy.
-
Flip On the Water and Check out for Leaks
Now that the toilet is put in and the water line is said, flip the water once more on on the isolation valve. Check the connection between the water line and the toilet tank, along with the connection between the toilet tank and the toilet bowl, for any leaks.
After the toilet tank has stuffed solely, flush the toilet to ensure it actually works. Moreover, confirm the bottom for any indicators that waste water is leaking from the wax seal. If that is the case, you may need to regulate the place of the wax seal or tighten the toilet bolts.
-
Caulk the Base of the Toilet
As long as there should not any leaks, it is best to make the most of a high quality caulk gun to make use of a bead of waterproof silicone caulk throughout the doorway and sides of the toilet. Depart the once more of the toilet uncaulked so water can escape if a leak sorts. It would help you to detect the leak faster, in its place of trapping the water beneath the toilet, the place it could probably rot the bottom.
-
Arrange a Toilet Seat
The last word step of this job is to place within the lavatory seat. Ideally, you took measurements ahead of time and acquired a bathroom seat that matches the model new lavatory appropriately. Line up the toilet seat with the holes within the lavatory bowl, and thread the bolts via the holes so that they lengthen via every the toilet seat and the toilet.
Add a washer to each bolt, and tighten new nuts onto the bolts to protected the toilet seat. If compulsory, use a wrench or a set of channel lock pliers to tighten the nuts, nevertheless simply bear in mind to don’t overtighten the nuts, as this may occasionally make it troublesome to remove the toilet seat ultimately.